1. For speeds in excess of 15 kmph, for more than 3 diversions on any side of the main line, the type of route indicator to be provided as per IRSEM is Multi lamp Direction Type with LED Matrix Any Route Indicator of approved design Direction Type 2. As per Para 7.8.9 of IRSEM, ATP (ETCS/TCAS/TPWS) with Cab Signalling for SPAD mitigation is necessarily required for speeds in excess of _______ 110 Kmph 160 kmph 140 kmph None of the options is true 3. Sanction of excess over original sanctioned cost (abstract cost) due to reasons other than price escalation can be done by zonal railways upto _______ 0.5 0.2 0.1 1 4. What is the maximum amount of DCRG paid to a Railway employee at the time of Superannuation? 20 Lakhs 30 Lakhs 15 Lakhs 10 Lakhs 5. The process of where a private address is converted into public address and vice-versa is _______ OSP NAT None of the options is correct VLAN 6. Currently what is the initial Grade Pay of ASTE/ADSTE Group B ? Level 7 Level 10 Level 8 Level 9 7. As per RDSO specification IRS: S 88/2004 Version 1.0 for Low Maintenance Lead Acid secondary cells used for S&T installations… frequency of topping up shall be not earlier than One month Six months Two months Three months 8. Example for Indicative accidents is SPAD Serious injuries to passenger or Railway worker Death of passenger or Railway worker Obstruction in Rail traffic for more than 24 hours 9. Chairman of SBF (Staff Benefit Fund) in Zonal Railway is _______ Principal Chief Personnel Officer SrDPO GM DRM 10. The number of quads required for working of UFSBI in Double line along with Up & Down BPAC is Two quad Two and Half quad One and half quad One quad 11. The maximum stroke of IRS CLAMP TYPE Point machine is _______ 220mm 160mm 143mm 115mm 12. As per ACTM manual, if for any reasons the protective metallic screen is not provided and portions of the signal or its fittings are falling within 2m of 25 kV live OHE, what is required to be done for working on the signal Both switching off the power to the 25 kV and obtaining the “permit to work” Either switching off or by obtaining “permit to work” By switching off the Power to the 25 kV live OHE By obtaining the “permit to work” 13. How much employee contribution goes to NPS? 8% of Basic Pay + DA 14% of Basic Pay + DA 12% of Basic Pay + DA 10% of Basic Pay + DA 14. How many sets of School Pass are issued to a Railway employee per child ? 4 sets per year 2 sets per year 3 sets per year 6 sets per year 15. In GeM purchase: What is the full form of CRAC -? Consignee Receipt and Acceptance Certificate. Closure report & acceptance certificate Consignee report & acceptance certificate Combined Receipt and Acceptance Certificate 16. In a work tender, if an offer is received without EMD within stipulated time period, how it should be dealt. Tender committee can decide to accept or reject. Offer to be summarily rejected. EMD can be asked for submission at a later date EMD can be deducted from the bills 17. S&T works are sanctioned under which plan-head in the ‘Pink book’? 3300 3100 1100 6400 18. Work study is concerned with _______ improving present method and finding standard time improving production planning and control motivation of workers improving production capability 19. The distance between the signal and the mast in front of it shall not be less than _______ 30 metres 50 metres 10 metres 40 metres 20. Characteristic impedance of PIJF pair cable is _______ ohms 470 ohms 56 ohms 600 ohms 1120 ohms 21. How much fees is to be paid for making application before Central Administrative Tribunal? Rs. 500 Rs. 1000 Rs. 50 Rs. 100 22. Two Packet Single Stage system of tendering shall be followed for Works Tenders valuing above which value :- Rs 5 Crores Rs 1 Crore Rs 10 Crores Rs 25 Crores 23. Daily allowance admissible to a railway employee on official tour for absence from Headquarters for 5 hours in a day is _______ 30% of one day allowance 100% of one day allowance 70% of one day allowance 50% of one day allowance 24. Characteristics of good earthing system are All of the options are true High Corrosion Resistance Mechanically Robust and Reliable Excellent Electrical Conductivity 25. The Telecom quad cable should be laid in which type of pipes on opposite side of the track to a Traction Sub-station PVC pipe RCC pipe None of the options is true GI pipe 26. For 6 Quad cable jointing, which type of joint requires the use of ‘Branch-off Clip’? Condenser joint Normal joint Derivation joint It is required for all types of joints 27. The impedance ratio of the transformer used for EC socket in an unloaded quad cable system in Ohms while terminating on insulated VF quad is 1120:1120 470:470 470:1120 470:310 28. The network architecture for the Unified Ticketing System is _______ 4-Tier 2-Tier 5-Tier 3-Tier 29. In an electronic interlocking system, Object Controller is connected to ‘EI’ through which of the following type of cables Only Copper Cables Only Optical fibre Cables It depends on the make of EI system Copper or optical fibre cables 30. Who is the Chairman of the Divisional Official Language Implementation Committee? Sr.Divisional Personnel Officer Additional Divisional Railway Manager Divisional Railway Manager Divisional Rajbhasha Adhikari Loading … Question 1 of 30
